ASME SA 789 Uns S32760 Welded Tubing and Super Duplex Tube Supplier in China

• Customization: Available
• Type: Round
• Standard: AISI, ASTM, DIN, JIS, GB
• Model NO.: ASME SA 789 UNS S32760
• Composition: Ferrous Steel Scrap
• Technique: Hot Rolled
• Shape: Round
• Surface Treatment: Oil Painting
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Cold Heading Steel, Mold Steel
• Application: Structural Steel Bar
• Materials: 10#-45#, 20mng, 25mng, 15crmog, 35CrMo, 16mn, etc
• Outer Diameter: 4-219mm
• Length: 5.8m-12m or as Required
• Thickness: 5 - 20 mm
• Steel Grade: 4130 4140
• Transport Package: in Bundles or Wooden Box
• Specification: 21.3-1219mm
• Trademark: JIADE
• Origin: China
• HS Code: 7307930000
• Production Capacity: 5000tons

Product Description

Product Parameters

 

Model Number	ASME SA 789 UNS S32760 Welded Tubing
Brand Name	OEM
origin	China
Small Orders	Accepted

ASME SA 789 UNS S32760 Welded Tubing and Super Duplex Tube supplier in China

The use of super duplex stainless steel extends to some of the most demanding applications across several industries. With significant additions of chromium, molybdenum, and nickel, Super Duplex Tubing brings about superiority in terms of both corrosion resistance and mechanical properties. The addition of nitrogen in the alloy increases the stability of austenite in the microstructure of Super Duplex 2507 Tube. The microstructure also contains a mix of both austenite and ferrite in an almost equal ratio of about 50%. The exceptional protection to chloride pitting as well as resistance to attack from crevice corrosion is why many Super Duplex Tube suppliers recommend the use of these components in industries like Flue Gas Scrubbing, Offshore Oil production /technology, Pulp & Paper Mills as well as the Oil and gas industry.

Though the Super Duplex 2507 Seamless Tube has many good properties, they face limitations with regards to their use at elevated temperatures. Special emphasis is placed on the Super Duplex 2507 Tubing produced according to specification  ASTM A789 as using them beyond a temperature of 600° F could have detrimental effects. Firstly, there is a loss in both the toughness and corrosion resistance properties. Next, the ASTM A789 UNS S32760 tube is prone to becoming brittle on prolonged exposure beyond 600° F. Usually, a Heat and product analysis, along with mechanical tests are performed over the ASTM A789 UNS S32750 to check their conformance to the specification.  Under this specification, the furnishing of every Super Duplex Welded Tube in a heat treated state must be in accordance with the particularised temperature as well as quench conditions.

Manufacturer and supplier of Super Duplex 2507 Tube in both grade ASTM A789 UNS S32760 & ASME SA 789 UNS S32750
 

Super Duplex 2507 Tube  Super Duplex Stainless Steel Tube ASTM A789 UNS S32750 Seamless Tubing

Table of contents

• Super Duplex 2507 Tube Available Sizes
• 2507 Super Duplex Seamless Tube Specification
• UNS S32750 Super Duplex 2507 Tubing Tests are normally carried out
• Super Duplex SS UNS S32750 Tube Price in India
• Types of Super Duplex 2507 Tube
• Complete range of UNS S32750 Duplex Alloy 2507 Tubes
• ASTM A789 UNS S32760 Boiler Tube Specific Temperature Range
• UNS S32760 Duplex Steel 2507 Heat Exchanger Tube Coating Standards
• ASME SA 789 UNS S32760 Square Tube size and weight
• UNS S32760 Super Duplex Saf 2507 Capillary Tube Size Chart
• Super Duplex SS 2507 Exhaust Tubing Gauge Thickness
• 2507 Super Duplex Stainless Steel Welded Tube Tolerances
• Super Duplex 2507 UNS S32760 Round Tube Other Value Added Facilities
• 25cr Super Duplex Steel Seamless Tube Chemical Structure
• ASME SA 789 UNS S32750 Tube Mechanical Properties
• Super Duplex UNS S32750 Tube Equivalent Standard
• ASTM A789 UNS S32750 Tube Standard Tolerances

Super Duplex 2507 Tube Available Sizes

Manufacturer of SCH 40S Super Duplex Tubing, SDSS Instrument Tubing and SAF 2507 Subsea Tube as per ASME B36.19 and ASTM A789, View our sizes and dimension table

UNS S32750 Super Duplex Seamless Tube

• Size (OD): .375" through 1" OD
• Wall Thickness : .035" through .065"

UNS S32750 Super Duplex Welded Tube

• Size (OD): .125" OD through 1" OD
• Wall Thickness : .035" through .109" wall

2507 Super Duplex Seamless Tube Specification

ASME SA 789 UNS S32760 Capillary, Round Tube, Square Tube and Boiler Tubing suppliers accordance to ASME B36.19M, ISO15156 and NACE MR0175 for marine environments

Super Duplex 2507 Tube International Specification	ASTM A 789 ASME SA 789 ASTM A789 UNS S32750 ASTM A789 UNS S32760
Standard Specification of UNS S32750 Super Duplex Tubing	ASME, EN, ASTM, JIS, NF, AMS, AISI, DIN, DS, GB, SAE, DTD, TOCT
2507 Super Duplex Tube Standard Tolerances	+/- 0.030; tolerance may vary depending on grade and thickness
UNS S32750 Super Duplex Seamless Tube Size	15 NB to 150 NB IN 1/2" OD - 12" OD
2507 Super Duplex Welded Tube Size	1/2" OD - 12" OD Guage: 25 SWG - 10 SWG
UNS S32760 Super Duplex Saf 2507 Tube Length	Upto 30 meters, Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded, or Custom Cut Lengths
UNS S32750 Duplex Alloy 2507 Tube WT	0.40 mm - 12.70 mm
UNS S32750 Super Duplex 2507 Tube Schedule	5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
Super Duplex SS UNS S32750 Tube Swg & Bwg	10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
ASTM A789 UNS S32760 Tubes manufacturing techniques	EFW, ERW, LSAW, Seam-Welded, CEW, DOM, Welded, Seamless, Redrawn, CDW, Fabricated
Origin of UNS S32760 Duplex Steel 2507 Tube material	Indian, European, Korean, Japanese
ASME SA 789 UNS S32760 Tube End Types	TOE / BOE = Treaded One End / Bevelled One End BLE : Bevel large end POE / BOE = Plain One End / Bevelled One End PBE = Plain Both Ends BBE : Bevel both ends TOE / POE = Treaded One End / Plain One End TBE = Treaded Both Ends BE : Bevelled end BSE : Bevel small end
UNS S32750 Duplex Alloy 2507 Tube End Finish	low-burr, burr-free, brushed, trovalised
ASTM A789 UNS S32760 Tubes Form	Round, Square, Oval, Rectangular, Coil, "U" Shape, Hydraulic & Honed Tubes
Super Duplex SS 2507 Tube Delivery Condition	Welded, calibrated Welded and redrawn Seamlessly drawn Polished Annealed and Pickled Hot Finished Bright Annealed Cold Drawn
2507 Super Duplex Stainless Steel Tube Packing	Ply Wooden Boxes PE Fabric Bundles Steel Strips Bundled Standard seaworthy export packing Plastic Bags, or as required
Super Duplex 2507 UNS S32760 Tube Value Added Services	Cut to size, thread, and groove
Port	Tianjin,China
Stocking distributor of leading Super Duplex 2507 Tube manufacturers	Sanyo Special Steel, Japan Schoeller Bleckmann, Austria Nippon Steel Corporation, Japan Sumitomo Metals, Japan Seah Steel Corporation, Korea Kobe Special Tube, Japan Tubacex Tubos Inoxidables S.A., Spain
Super Duplex 2507 UNS S32760 Tube Dimensional Specification	ANSI/ ASME B36.10, B36.19, B2.1
Marking on 25cr Super Duplex Steel Tube	Specification Material Grade Nominal Size Schedule or Wall Thickness Method of Manufacturing (Seamless or Welded) Heat Number Supplier / Manufacturer's Name or Custom Logo - on request Marked Tube Sample: ASTM A789 UNS S32750 12" NB SCH 40S SEAMLESS HEAT NO. XXXX
Application wise types of UNS S32760 Duplex Steel 2507 Tubes	ASME SA 789 UNS S32760 Oil Tube, Gas Tube, Fluid Tube, Boiler and UNS S32760 Super Duplex Saf 2507 Heat exchanger Tube

Many Super Duplex Tube suppliers, stockholders,exporters, importers, dealers, and distributors purchase 2507 Tubing from JIADE GROUP Overseas and distribute in their own countries with higher margins, so contact JIADE GROUP directly to check our price list to get the best price in China. Contact us now for Free quote !!!

UNS S32750 Super Duplex 2507 Tubing Tests are normally carried out

• Mill Test Certificates with all Super Duplex 2507 Tube
• EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
• 100% inspection according to NACE standards
• NABL Approved Lab Reports
• Mechanical Reports
• PMI Test Reports
• Visual Inspection Reports
• Third Party Inspection for UNS S32750 Super Duplex Tubing
• Raw Materials Certificate
• Destructive Test Report
• Chemical Reports
• Heat Treatment Charts
• Form A for Generalized System of Preferences (GSP)
• HS Code Commercial Invoice
• Fumigation Certificates
• Non Destructive Test
• 100% Radiography Test Report for UNS S32750 Duplex Alloy 2507 Tube
• Surface roughness measurement report
• Laboratory Test Certificate from Govt. Approved Lab
• Moisture testing

Super Duplex SS UNS S32750 Tube Price in China

BE End Super Duplex Stainless Steel Tube supplier in various sizes & surface finish, Manufacturer and exporter of SDSS 2507 Heat Exchanger Tubes in exact sizes, Get free quote Now!

ALLOY 2507 TUBE	*PRICE START RANGE PER KG EX MUMBAI
MANUFACTURING TYPE	USA FOB PRICE*	EUROPE FOB PRICE *	MALAYSIA FOB PRICE*	SINGAPORE FOB PRICE*
2507 Seamless Tube	US $ 26	21.17 Euro	104.96 Malaysia Ringgit	34.42 Singapore Dollar

Super Duplex Stainless Steel Tube Price today in India is 500-700/ Kg/Alloy 2507 ASTM A789 UNS S32750 / ASTM A789 UNS S32760. This is equal to 34.58 (AED) United Arab Emirates Dirham and 10.04 (USD) United States Dollar

Contact us for Free quote and sample, you can also mail us on 

Types of Super Duplex 2507 Tube

 

UNS S32750 Super Duplex Welded Tube

 

2507 Super Duplex Seamless Tube

 

UNS S32750 Super Duplex 2507 Round Tube

 

Super Duplex SS UNS S32750 Rectangular Tube

 

UNS S32750 Duplex Alloy 2507 Square Tube

 

ASTM A789 UNS S32760 Schedule 5S Tube

 

UNS S32760 Duplex Steel 2507 Schedule 40S Seamless Tube

 

ASME SA 789 UNS S32760 Polished Tube

 

UNS S32760 Super Duplex Saf 2507 Exhaust Tubing

 

Super Duplex SS 2507 Heat Exchanger Tube

 

2507 Super Duplex Stainless Steel Boiler Tube

 

Super Duplex 2507 UNS S32760 Capillary Tube

 

25cr Super Duplex Steel Gas Tube

 

ASME SA 789 UNS S32750 ERW Tube

 

Super Duplex UNS S32750 EFW Tube

 

ASTM A789 UNS S32750 SCH 40 Seamless Tube

 

25cr Super Duplex Steel Precision Tubes

 

ASME SA 789 UNS S32750 Coiled Tube

 

Super Duplex UNS S32750 Condenser Tube

 

ASTM A789 UNS S32750 Instrument Tubing

Complete range of UNS S32750 Duplex Alloy 2507 Tubes

ASME SA 789 UNS S32760 Square Tube	2507 Super Duplex Stainless Steel Sanitary Tubing
UNS S32760 Super Duplex Saf 2507 Exhaust Tubing	1 inch Super Duplex 2507 UNS S32760 Tubing
UNS S32750 Super Duplex Square Tubing	UNS S32750 Super Duplex 2507 Hollow Tubes
2507 Super Duplex Round Tubes	Re Drawn Super Duplex SS UNS S32750 Tubing
UNS S32750 Super Duplex Seamless Tube	Super Duplex SS UNS S32750 Coil Tubes
25cr Super Duplex Steel High Pressure Tubes	ASTM A789 UNS S32750 Elliptical and Oval Tubes
ASTM A789 UNS S32750 Round Tubing	2507 Super Duplex Finned Tubes
Super Duplex SS 2507 Rectangular Tubing	UNS S32750 Duplex Alloy 2507 Coiled Tubing
UNS S32750 Super Duplex 2507 ERW Tubes	High Pressure ASTM A789 UNS S32760 Tube
Super Duplex SS UNS S32750 Capillary Tubing	UNS S32760 Duplex Steel 2507 Heat exchanger Tube
UNS S32750 Duplex Alloy 2507 Hydraulic Tubing	ASME SA 789 UNS S32760 Condenser Tubing
ASTM A789 UNS S32760 Welded Tube	Thin Wall UNS S32760 Super Duplex Saf 2507 Tubing
12mm Super Duplex UNS S32750 Tubing	Super Duplex SS 2507 Polish Tubing
Super Duplex 2507 UNS S32760 Small Diameter Tubing	25cr Super Duplex Steel Tube Bends

ASTM A789 UNS S32760 Boiler Tube Specific Temperature Range

Suitable to use Upto 600° F (316° C).

UNS S32760 Duplex Steel 2507 Heat Exchanger Tube Coating Standards

• thick film epoxy cladding
• Curran 1000 T Hybrid Epoxy
• Phenol Epoxy
• Novolac Epoxy
• Curralon ®
• Sakaphen- Shell and tube heat exchanger lining
• High Functionality Epoxy - Curran Coating
• Curran 1000T

ASME SA 789 UNS S32760 Square Tube size and weight

DIMENSIONS	WALL	WEIGHT PER	DIMENSIONS	WALL	WEIGHT PER
(MM)	(MM)	METRE (KG)	(MM)	(MM)	METRE (KG)
12.7 x 12.7	1.20	0.44	40 x40		1.20	1.49
12.7 x 12.7	1.50	0.55	40 x40		1.50	1.85
15 x 15	1.20	0.53	40 x40		2.00	2.45
15 x 15	1.50	0.65	40 x40		3.00	3.75
20 x 20	1.20	0.71	50 x50		1.50	2.32
20 x 20	1.50	0.88	50 x50		2.00	3.08
20 x 20	2.00	1.19	50 x50		3.00	4.65
25 x 25	1.20	0.92	60 x60		2.00	3.71
25 x 25	1.50	1.14	60 x60		3.00	5.49
25 x 25	2.00	1.49	70 x70		3.00	6.53
25 x 25	3.00	2.20	80 x80		2.00	4.98
30 x 30	1.20	1.10	80 x80		3.00	7.53
30 x 30	1.50	1.37	100 x 100		2.00	6.40
30 x 30	2.00	1.84	100 x 100		3.00	9.53
30 x 30	3.00	2.72

UNS S32760 Super Duplex Saf 2507 Capillary Tube Size Chart

Gauge	Outside Diameter Tolerance mm	Regular Wall (RW) mm	Thin Wall (TW) mm	Extra Thin Wall (XTW) mm	Ultra Thin Wall (UTW) mm
30	0.304 - 0.317	0.064 - 0.089
29	o.330 - 0.342	0.064 - 0.089
28	0.355 - 0.368	0.076 - 0.102
27	0.406 - 0.419	0.089 - 0.115	0.064 - 0.089
26	0.457 - 0.469	0.089 - 0.114
25	0.508 - 0.520	0.115 - 0.140	0.089 - 0.114
24	0.558 - 0.571	0.114 - 0.140	0.089 - 0.114		0.051 - 0.102
23	0.635 - 0.647	0.140 - 0.165	0.089 - 0.114		0.051 - 0.102
22	0.711 - 0.723	0.140 - 0.165	0.096 - 0.121	0.077 - 0.102	0.051 - 0.102
21	0.812 - 0.825	0.140 - 0.165	0.102 - 0.127		0.051 - 0.102
20	0.901 - 0.914	0.108 - 0.165	0.108 - 0.134
19	1.054 - 1.079	0.166 - 0.216	0.102 - 0.140	0.070 - 0.108
18	1.257 - 1.282	0.191 - 0.241	0.127 - 0.165	0.083 - 0.121	0.051 - 0.102
17	1.460 - 1.485	0.177 - 0.229	0.115 - 0.152	0.083 - 0.127	0.057 - 0.102
16	1.638 - 1.663	0.204 - 0.254	0.127 - 0.165	0.096 - 0.133	0.070 - 0.121
15	1.816 - 1.841	0.204 - 0.254	0.127 - 0.165	0.096 - 0.134	0.070 - 0.121
14	2.082 - 2.133	0.216 - 0.292	0.165 - 0.229	0.114 - 0.165	0.076 - 0.134
13	2.387 - 2.438	0.267 - 0.343	0.191 - 0.267
12	2.743 - 2.749	0.267 - 0.321
11	3.023 - 3.073	0.293 - 0.368	0.216 - 0.292
10	3.378 - 3.429	0.318 - 0.394	0.216 - 0.292

 

N.B	(a)	Any intermediate size can be supplied on request.
	(b)	Supplied in sufficiently hard condition and also tested for the stiffness.

Super Duplex SS 2507 Exhaust Tubing Gauge Thickness

GAUGE	THICKNESS RANGE (INCH)	TYPICAL VALUE (INCH)
22	0.025 - 0.029	0.028
20	0.031 - 0.035	0.035
19	0.038 - 0.042	0.042
18	0.044 - 0.049	0.049
17	0.053 - 0.058	0.058
16	0.060 - 0.065	0.065
15	0.066 - 0.074	0.072
14	0.075 - 0.085	0.083
13	0.087 - 0.097	0.095
12	0.101 - 0.111	0.109
11	0.112 - 0.122	0.12
10	0.126 - 0.136	0.134
9	0.140 - 0.150	0.148
8	0.157 - 0.167	0.165
7	0.175 - 0.185	0.18

2507 Super Duplex Stainless Steel Welded Tube Tolerances

• Straightness: .030" in 3"
• Wall Tolerance +/- 10%

O.D. INCHES	WALL THICKNESS INCHES	O.D. +/- INCHES
1/2" to 1" incl.	.025 to .065	.005
	Over .065 to .134	.010
1 to 1-1/2" incl.	.025 to .065	.008
	Over .065 to .134	.010
1-1/2" to 2" incl.	.025 to .049	.010
	Over .049 to .083	.011
	Over .083 to .148	.012
2" to 2-1/2" incl.	.032 to .065	.012
	Over .065 to .109	.013
	Over .109 to .165	.014
2-1/2" to 3-1/2" incl.	.032 to .165	.014
	Over .165 to .220	.020
3-1/2" to 5" incl.	.083 to .165	.020
	Over .165 to .220	.025

Super Duplex 2507 UNS S32760 Round Tube Other Value Added Facilities

• We cut UNS S32750 Super Duplex welded tubing to your exact dimension
• 2507 Super Duplex Tubing can be polished per customer specification
• Beveling UNS S32750 Super Duplex 2507 tubes
• Heat treating & annealing
• Honing/ turning process for Super Duplex 2507 Tube
• Additional positive material identification (PMI) testing if required
• Ultrasonic Testing (UT)

25cr Super Duplex Steel Seamless Tube Chemical Structure

GRADE	SUPER DUPLEX 2507
Carbon (C) Max.	0.030
Manganese (Mn) Max.	1.20
Phosphorous (P) Max.	0.035
Sulphur (S) Max.	0.020
Silicon (Si) Max.	0.80
Chromium (Cr)	24.0-26.0
Nickel (Ni)	6.0-8.0
Molybdenum (Mo)	3.0-5.0
Nitrogen (N)	0.24-0.32
Iron (Fe)	Bal.
Copper (Cu)	0.50
Other Elements	-

ASME SA 789 UNS S32750 Tube Mechanical Properties

Physical Properties of Super Duplex 2507 Tube in the Annealed Condition at -20°F to +100°F

		TENSILE STRENGTH	YIELD STRENGTH
ALLOY	UNS DESIGNATION	SPEC.	PSI	MPA	KSI	PSI	MPA	KSI	ELONGATION IN 2 IN. (MIN.) %	GRAIN SIZE REQ.	MAX. HARDNESS	MODULUS OF ELASTICITY (X106PSI)	MEAN COEFFICIENT OF THERMAL EXPANSION (IN./IN./°F X 10-6)	THERMAL CONDUCTIVITY (BTU-IN/ FT2-H-°F)
2507	S32950	A789, A790	100,000	690	100	70,000	485	70	20	-	30.5 Rc	-	-	-
2507	S32750	A789, A790	116,000	800	116	80,000	550	80	15	-	32 Rc	27.5	7.2	98

Super Duplex UNS S32750 Tube Equivalent Standard

ALLOY	UNS DESIGNATION	WERKSTOFF NR.	SPECIFICATIONS	AFNOR	GRADE	1.4410
2507	S32750	1.4410	A/SA789, A/SA790	Z3 CN 25.06 Az	F53	X2 Cr Ni MoN 25.7.4

ASTM A789 UNS S32750 Tube Standard Tolerances

	SIZE RANGE		STANDARD TOLERANCES
FORM	OD	WALL	LENGTHS AND/OR COILS	GRADES	OD	WALL	LENGTHS
Pressure & Corrosion Tubing Meets or exceeds requirements for welded Specification: ASTM-A789	1/16" (1.59 mm) - 4" (101.6 mm) Metric sizes also available	0.010" (0.25 mm) - 0.220" (5.59 mm)	Random or cut lengths up - 40' (12.2 m) Coils to 1-1/2" OD	Super Duplex 2507	<1-1/2" (38.1 mm) ±0.005" (0.13 mm) 1-1/2" (38.1 mm) to 3" (76.2 mm) ±0.010" (0.25 mm) 3-1/2" (88.9 mm) to 4" (101.6 mm) ±0.015" (0.38 mm)	±10%	Randoms up to +2" (50.8 mm) Cuts +1/8" (3 mm) -0" Coils to 80,000' (24,384 m)
Subsea Umbilical Tubing Specifications: ASTM-A789 and ASTM-A790	3/8" (9.53 mm) to 1-1/2" (38.1 mm)	0.039" (0.99 mm) to 0.125" (3.18 mm)	Cut lengths to 60' (18.3 m) Coils to 1-1/2" OD*	Super Duplex 2507	±0.005" (0.127 mm)	±10%	Coils to 80,000' (24,384 m)

Products

• Stainless Steel Pipe
• Stainless Steel Seamless Tubes
• Stainless Steel Welded Tube
• Nickel Alloy Pipe & Tube
• Duplex Pipe
  • Duplex 2205 Pipe
  • Duplex 2205 Tube
  • Super Duplex 2507 Pipe
  • Super Duplex 2507 Tube
  • ASTM A789 UNS 32520
  • ASTM A789 UNS 32900
  • ASTM A789 UNS 31260
• Titanium Pipe
• Copper Nickel Pipe
• 6MO Stainless Steel Pipe
• Tube Fittings
• Instrumentation Valves
• Buttweld Pipe Fittings

Detailed Photos

 

Company Profile

Lead time 10-15 days | 80% of output for export

A Trading Company Specializing in Steel Industry for Over 30 Years
Shaanxi Jiade Import & Export is one of the leading professional steel pipes and pipe fitting suppliers, established in 1991 and charge of the export business. We have more than 30 years' experience in manufacturing, distributing, processing, and exporting hot rolled and cold drawn seamless, ERW, EFW, HFW, LSAW, DSAW, and SSAW pipes boiler tubes, heat-exchanger tubes, condenser tubes, super-heater tubes, hydraulic honed tubes, mechanical tubes, structural tubes, line pipes, elbows, tees, reducers, and flanges. We mainly export products to Africa, Asia, Europe, Oceania, and North and South America.

Supported by Machines and Equipment
All our products are manufactured with the latest manufacturing techniques with machines and equipment, which are fitted with the highest technology, to provide products in full conformity with international standards.

Meeting Inspection and Approval Certificates
We have passed the Mill Test certificate, C/W certificate (Calibration works certificate) EN 10204 3.1, DIN 50049 3.1, ISO 10474 3.1, NACE MR-0103/NACE MR-0175/ISO 15156, PED-97/23/EC, AD-2000-WO, with 3.2 certificates duly certified and approved by LRS, GL, BV, DNV, ABS, SGS, TUV, RINA, IRS, NORSOK and more.

Customized Service
We provide product customization services such as shot blasting, precision pipe cutting, cut and roll grooving, custom pipe fabrication, pipe threading, pipe beveling, and coating. They are also approved by Third Party inspection agencies like DNV, BV, SGS, Moody, TuV, ABS, LR, GL, PED, RINA, KR, NKK, AIB-VINEOTTE, CEIL, VELOSI, CCSI, and more. We supply for PetroVietnam, WSF, YPFB, AWH, HMC, PTT, EP PetroEcuador, POD, KNPC, and more.

Establishing Friendly Partnership
Our mission is whether our clients are active in the oil and gas, water supply line, or construction, we endeavor to deliver the highest quality products and value-added services to support our clients' business. We pursue a win-win situation and long-term cooperative relationships with customers, providing specializing service for the old and new customers with better and more economical results.

Packaging & Shipping

Shipping Information

FOB Port	Tianjin
Weight per Unit	1500.0 Kilograms
HTS Code	7304.41.90 00
Export Carton Dimensions L/W/H	11.8 x 1.0 x 0.8 Meters

Lead Time	15-30 days
Dimensions per Unit	11.8 x 1.0 x 0.8 Meters
Units per Export Carton	25.0
Export Carton Weight	1500.0 Kilograms

Certifications

Main Export Markets

- Asia

- Australasia

- Central/South America

- Eastern Europe

- Mid East/Africa

- North America

- Western Europe

- <li>Southeast Asia